You love your Tesla, but you hate it when your windshield washer fluid doesn’t work.
You need it to keep your windshield clean and clear from dirt, bugs, or ice. But sometimes, nothing comes out when you press the button. What’s going on?
Don’t worry, you’re not alone. Many Tesla owners have faced this problem, and there are some simple and easy ways to fix it.
In this article, we’ll show you some of the possible causes and solutions for your Tesla windshield washer fluid not working. Read on and find out how to get your washer fluid flowing again.
#1. The reservoir is empty
One of the most obvious and easy-to-check reasons why your Tesla windshield washer fluid might not be coming out is that the reservoir is empty.
This can happen if you use the washer fluid frequently, or Windshield Washer Fluid is leaking. To Fix the leakage problem, you can follow the below-given steps:
1 The level of washer fluid in your reservoir may be low. You can try refilling it and see if the leak stops.
2. The reservoir itself may have a crack or hole. You can check for any visible damage and replace the reservoir if needed.
3. The hoses and connections leading to and from the reservoir may be loose or broken. You can inspect them and tighten or replace them as necessary.
4. The pump that delivers the washer fluid to the nozzles may be faulty or leaking. You can locate the pump and test its function and seal.
To check if the reservoir is empty, just lift up the hood and look for the windshield washer fluid reservoir.
It should be located on the right side of the frunk, near the front bumper. If it’s empty, simply fill it up with washer fluid and you should be good to go.
Tesla recommends using washer fluid that meets or exceeds the specifications of ASTM D3306, which is a standard for automotive engine coolants.
You can find this type of washer fluid at most auto parts stores or online.
If you live in a cold climate, you might want to use washer fluid that has antifreeze properties, to prevent it from freezing in the lines or nozzles.
Tesla advises switching to antifreeze rather than prepared liquid if you live in a sub-zero climate.
#2. The washer nozzle is clogged
Another possible reason why your Tesla windshield washer fluid might not be coming out is that the washer nozzle is clogged.
This can happen if the nozzle gets filled with dirt or debris, or if there’s something blocking the flow of fluid.
Tesla recommends avoiding fluids with characteristics such as water repellents, insect washes, or volatile chemical compounds. These may result in squeaking, streaking, smearing, and other defects.
To check if the nozzle is clogged, you can try to spray some washer fluid while parked and look at the nozzle. If you see a weak or uneven spray or no spray at all, then the nozzle might be clogged.
To unclog the nozzle, you can try to use a small pin or needle to gently poke through the hole and clear any obstruction.
You can also use compressed air to blow out any debris from the nozzle. Be careful not to damage the nozzle or scratch the paint.
If the nozzle is still clogged after these steps, you might need to replace it or have it serviced by a professional.
#3. The hose or pump is disconnected or faulty
A third possible reason why your Tesla windshield washer fluid might not be coming out is that there is a problem with the hose or pump that delivers the fluid from the reservoir to the nozzle.
This can happen if the hose or pump is disconnected, damaged, or faulty.
To check if the hose or pump is working properly, you can listen for a humming sound when you press the washer button. If you hear nothing, then there might be an electrical issue with the pump or a fuse.
If you hear a sound but no fluid comes out, then there might be a leak or a disconnection in the hose.
To fix this issue, you might need to inspect the hose and pump for any signs of damage or disconnection.
You can access them by removing the plastic panel that covers the top half of the frunk.
If you find any problem with the hose or pump, you might need to reconnect them, replace them, or have them serviced by a professional.
Conclusion
Tesla windshield washer fluid not working can be a common and annoying problem, but it can also be easily solved in most cases.
By checking and filling up the reservoir, unclogging the nozzle, and inspecting the hose and pump, you can restore your windshield washer fluid system and enjoy a clear and safe view of the road.
If none of these solutions work for you, or if you are unsure about how to perform them, you should contact the Tesla service center or mobile service for assistance. They will be able to diagnose and fix your problem quickly and efficiently.
