Tesla Wall Charger Tripping Breaker? (FIXED)

If you have installed a Tesla Wall Charger at your home, you may have encountered a frustrating issue where the breaker for the charging circuit keeps tripping.

This can be a common problem for EV owners, and it can be especially inconvenient when you rely on your EV for daily transportation.

In this article, we will explore the possible causes of this issue and provide you with solutions to help you get back to charging your Tesla.

So, if you’re experiencing this problem, keep reading to learn more about what might be causing it and how you can fix it.

Why Tesla Wall Charger Tripping Breaker?

There could be several reasons for the Tesla wall charger tripping breaker, such as an overloaded circuit, incorrect installation of the wall connector without a dedicated circuit, faulty wiring, or an exposed connection in the electrical system leading to a short circuit or a ground fault surge.

What size breaker do you actually need?

Tesla wall chargers work best with 60-amp circuit breakers. A 60 amp breaker enables between 30 and 44 miles of battery range per hour of charging. Tesla chargers have a built-in GFCI or ground fault circuit interrupter, so you won’t need a breaker with GFCI protection.

How to Fix Wall Charger Tripping Breaker?

In this troubleshooting guide, we will explore some of the possible causes of why your Tesla wall charger keeps tripping the breaker and what you can do to fix the problem.

#1. Overloaded Circuit

The first step in troubleshooting the problem is to check the circuit breaker. If the circuit breaker keeps tripping, it could be due to an overloaded circuit, a short circuit, or a ground fault.

To check the circuit breaker, turn off the wall charger and reset the breaker. If the breaker trips again when you turn on the wall charger, you may need to call an electrician to inspect and repair the circuit.

#2. Reduce the Charging Speed

You can try reducing the charging speed on the Tesla wall charger. This may help prevent the circuit from tripping.

#3. Faulty Wiring

Another possible cause of the breaker tripping is faulty wiring. Make sure that the wiring in the wall charger is properly connected and not loose or damaged.

Check for any signs of frayed or exposed wires, which can cause short circuits and trip the breaker. If you find any damaged wiring, it is best to call an electrician to repair it.

#4. Check the Amperage

The Tesla wall charger comes in different amperage options, and it is important to make sure that you have the right amperage for your home’s electrical system. If the amperage is too high, it can overload the circuit and trip the breaker.

You can check the amperage on the label of the wall charger or on the manual that came with it. If you have the wrong amperage, you may need to replace the wall charger with one that has the correct amperage rating.

#5. Check for Other Appliances

If your Tesla wall charger is tripping the breaker, it could be due to other appliances that are using the same circuit.

Check to see if there are other high-powered appliances or devices connected to the same circuit, such as air conditioners, electric heaters, or power tools. If so, try disconnecting them and see if the problem persists.

Call Tesla Support

If you have tried all of the above steps and the wall charger still keeps tripping the breaker, it is best to call Tesla support. They can provide further assistance and troubleshoot the problem for you.

They may also send a technician to inspect the wall charger and make any necessary repairs or replacements.

Conclusion: A Tesla wall charger that keeps tripping the breaker can be a frustrating problem, but with the above troubleshooting steps, you can identify and fix the issue.

Remember to always follow the manufacturer’s instructions and consult a professional electrician if you are unsure about any aspect of the installation or repair process.

With proper maintenance and care, your Tesla wall charger can provide you with reliable and efficient charging for your electric car.