Whether you are a seasoned electric scooter owner or a newbie, you will find these tips useful in keeping your ride in top condition.
Before CLeaning
Turn off the scooter: The scooter must be turned off and the key is removed from the ignition before you start cleaning it.
Let the scooter cool down: If the scooter has been recently used, it is important to allow it to cool down before cleaning it.
Avoid water on electrical components: Be careful not to get water on any electrical components, including the battery and charging port. This can cause serious damage and even electric shock.
1. Cleaning the Touchscreen
Use a soft, lint-free cloth, like a microfiber cloth, to gently wipe the touchscreen to remove any loose dirt or debris.
If there are any stubborn stains or grime on the touchscreen, you can dampen the cloth with a small amount of water or a gentle cleaner.
Never use harsh chemicals, as they can damage the touchscreen of your scooter.
Related: Cool Accessories For Ola Scooter
If you have a protective screen cover, remove it and clean it separately using the same process.
Related: Ola S1 Screen not turning on: how to fix it?
2. Cleaning the Scooter Battery
Cleaning the battery is much easier when you have a removable battery. Just get it out and clean it separately.
Use a clean and dry cloth to wipe any dust or dirt off the battery. Be sure not to use any water or cleaning solutions to clean the battery, as this can damage it.
Use a wire brush to gently scrub the terminals until they are clean.
You can also use a mixture of baking soda and water to remove the corrosion.
Once the battery is clean and dry, reconnect it to the scooter.
Related: Electric Scooter Charging Tips
Preparing Electric Scooter for Washing…
1. Cover 2 mics below the touchscreen with cello tape
2. Cover speakers and phone pockets with packing tape to prevent water damage and pocket filling with water and drying hassle afterward.
Washing the Electric Scooter
Never give a pressure wash to your electric scooter exterior as it impacts the paint of the scooter.
Just mix a solution of mild detergent and warm water in a bucket.
Gently clean the body of the scooter with a sponge or a soft cloth into the solution and wring it out to remove excess water.
Avoid getting water on the electrical components and the battery.
Rinse the scooter: Make sure to remove all soap residue, as it can leave streaks and spots.
Dry the scooter: You can also let the scooter air dry for a few hours before using it again.
Apply a protectant: Apply a protectant or a wax to the body of the scooter to help keep it looking good and protect it from the elements.
Can I use pressure water to clean the electric scooter?
No. It is generally not recommended to use a pressure washer to clean an electric scooter, as the high pressure can damage the scooter’s electrical components and potentially cause electrical failure or other issues.
Should I buy an electric scooter cleaning kit?
If you feel that it would make the cleaning process easier and more effective, and you have the budget to invest in one, then it may be a good idea.
Can I use shampoo or liquid to clean the electric scooter?
You can use a mild soap/liquid specifically made for cleaning vehicles, which can be found at many automotive stores.
How to clean an electric scooter at home?
Never use a pressure wash to clean an electric scooter. Be careful to avoid getting water on the touchscreen or mic and on the battery. Dry the scooter thoroughly before use.
