One of the common issues that some Tesla owners have reported is the onboard GPS getting stuck or not updating the location correctly.
This can cause problems with navigation, autopilot, supercharging, and other features that rely on accurate GPS data.
If you are experiencing this issue with your Tesla, don’t panic.
There are some possible solutions that you can try to fix yourself or with the help of Tesla customer support. Here are 7 ways to fix your Tesla GPS not working:
How To Fix Tesla GPS Not Working Issue?
#1. Soft Reset
A soft reset is a simple and quick way to reboot your Tesla’s touchscreen and refresh the system. To perform a soft reset, follow these steps:
1. Put your car in park mode and keep your foot on the brake pedal.
2. Press and hold the two scroll buttons on the steering wheel for about 20 seconds until the touchscreen turns black and then shows the Tesla logo.
3. Wait for the touchscreen to restart and check if the GPS is working properly.
#2. Hard Reset
A hard reset is a more thorough way to reboot your Tesla’s entire system, including the driver’s screen, media control unit (MCU), and battery management system (BMS). To perform a hard reset, follow these steps:
1. Open all your car doors, windows, and front and rear trunks.
2. Go to Controls > Safety & Security > Power Off on the touchscreen and tap Power Off.
3. Get out of your car and remove the battery cover on the front trunk.
4. Locate the 12V battery and remove the red cap.
5. Find the positive (+) and negative (-) terminals on the battery.
6. Using a pair of pliers, disconnect the negative (-) terminal first and place a rag under it to prevent it from touching other parts.
7. Go back to your driver’s seat and find the latch between the seat and the carpet on both sides. Push the latch toward the midline to unlatch it.
8. Lift the seat and find the tire foam insulator. Pull it out to locate a connector.
9. Squeeze down the lock on the connector and wait for one minute. Then, swing the lock up.
10. Place the tire foam insulator back and align the seat as before. Latch the seat on both sides.
11. Reconnect the negative (-) terminal on the battery using the pliers. You will hear some sounds of the car resetting and restarting.
12. Put back the battery cap and cover.
13. Test if the GPS is working properly.
#3. Power Off
Another way to refresh your Tesla’s system is to power off your car completely for a few minutes. To do this, follow these steps:
1. Put your car in park mode and go to Controls > Safety & Security > Power Off on the touchscreen.
2. Tap Power Off and wait for about two minutes. Do not touch any buttons or open any doors during this time.
3. When you see the air conditioning, lights, and other features turn back on, it means your car has powered on again.
4. Check if the GPS is working properly.
#4. Check or Replace GPS Fuse
Sometimes, a loose or faulty fuse can cause problems with your Tesla’s GPS. To check or replace your GPS fuse, follow these steps:
1. Locate your fuse box under the glove compartment on the passenger side.
2. Refer to your owner’s manual or online resources to find out which fuse is responsible for your GPS. It is usually labeled as NAV SD CARD or NAVIGATION SYSTEM.
3. Pull out the fuse using a fuse puller or pliers and inspect it for any damage or corrosion. If it looks fine, plug it back in tightly. If it looks damaged, replace it with a new one of the same rating.
4. Test if the GPS is working properly.
#5. Update Software
Sometimes, a software bug or glitch can cause problems with your Tesla’s GPS. To fix this, you need to update your software to the latest version available. To do this, follow these steps:
1. Connect your car to a Wi-Fi network and go to Controls > Software on the touchscreen.
2. If there is an update available, you will see a notification on the screen. Tap Download to start downloading it.
3. Once it is downloaded, you will see an option to Install Now or Schedule Installation. Choose whichever suits you best.
4. Wait for the installation to complete and check if the GPS is working properly.
#6. Change Nav SD Card
Another possible cause of your Tesla’s GPS not working is a corrupted or faulty navigation SD card that stores map data. To change your nav SD card, follow these steps:
1. Locate your MCU under the center console near the cup holders.
2. Remove the plastic cover by pulling it up gently.
3. Find a small slot labeled NAV SD CARD on one side of the MCU.
4. Push the card in slightly to eject it and pull it out carefully.
5. Insert a new nav SD card that is compatible with your Tesla model and software version. You can buy one from Tesla or online.
6. Push the card in until it clicks and replace the plastic cover.
7. Test if the GPS is working properly.
#7. Contact Tesla Customer Support
If none of the above methods work, you may need to contact Tesla customer support for further assistance. They can remotely diagnose your car and send a GPS reset command to your car. They can also schedule a service appointment for you if there is a hardware issue that needs to be fixed. To contact Tesla customer support, follow these steps:
1. Go to the Tesla website and find the contact information for your region.
2. Call or email them and explain your problem. Provide them with your car’s VIN, software version, and any screenshots or error messages you have.
3. Follow their instructions and wait for their response.
Conclusion
Tesla GPS not working can be a frustrating issue, but it is not impossible to fix.
By trying the methods above, you may be able to solve it yourself or with the help of Tesla customer support. Remember to always keep your software updated and check your fuses and nav SD card regularly to prevent future problems.
We hope this article was helpful and informative for you.
