Like any electronic device, Aovo Pro Scooter is not immune to issues, and one common problem that users may encounter is a scooter that fails to charge.
If you’re facing this frustrating situation, don’t worry, as we have compiled a troubleshooting guide to help you get your Aovo Pro Scooter back on the road.
Why Aovo Pro Scooter Not Charging?
There are three main components that are involved in the charging process of an e-scooter: the battery, the charger, and the charger port.
Any of these components can malfunction or get damaged, resulting in a charging failure. Here are some of the common causes of e-scooter not charging:
#1. Faulty charger
A defective charger is the most common cause of charging problems. If you have another e-scooter or a compatible charger, you can try swapping the chargers to see if the problem persists.
If the other charger works, then your original charger is faulty and needs to be replaced. You can also check the charger for any visible signs of damage, such as burnt plastic, broken pins, cut wires, or loose connections.
Another way to test the charger is to use a voltmeter or multimeter and measure the voltage output of the charger.
It should be slightly higher than the voltage of the battery.
For example, if your battery is 36 volts, your charger should output around 39 volts. If the voltage is zero or lower than the battery’s voltage, the charger is defective and cannot charge the battery¹.
#2. Blown fuse
Many e-scooters have a small fuse that protects the battery and electronics from sudden power surges.
The fuse is usually located inside the deck of the e-scooter and connected to a wire. The fuse can be either a glass cartridge fuse or a blade fuse.
To check if the fuse is blown, you need to open up the deck and remove the fuse from its holder.
You can inspect the fuse visually and look for a gap in the wire or a dark or metallic smear inside the glass.
If you see any of these signs, the fuse is blown and needs to be replaced with a new one of the same rating².
#3. Damaged battery
A battery that has reached the end of its life span or has been exposed to water damage can also prevent your e-scooter from charging. To check if your battery is damaged, you need to open up the deck and examine the battery physically.
Look for any signs of leakage, corrosion, swelling, or deformation. If you see any of these signs, your battery is damaged and needs to be replaced with a new one of the same type and capacity.
You can also test your battery’s voltage with a voltmeter or multimeter. The actual voltage of the battery should be slightly higher than its stated value.
For example, if your battery is 36 volts, it should measure around 37 volts when fully charged. If the voltage is lower than that, your battery is weak and cannot hold a charge¹.
#4. Faulty charger port
Sometimes, the problem lies with the charger port on your e-scooter. The charger port may become loose or have a loose connection that prevents it from receiving power from the charger.
You can check if your charger port is working by using a multimeter and measuring the voltage at the port when it is connected to the charger. It should match the voltage output of the charger.
If it doesn’t, then your charger port is faulty and needs to be repaired or replaced.
Another thing to check is if there is any dirt or debris inside the charger port that may block the current flow.
You can use a small bottle of keyboard cleaner or compressed air to blow out any dust or particles from the port.
Tips For Aovo Pro Scooter Battery Charging
To avoid having charging issues with your e-scooter in the future, here are some tips on how to take care of your battery and charger:
#1. Use only compatible chargers
Always use only chargers that are designed for your e-scooter model and battery type. Using incompatible chargers can damage your battery or cause a fire hazard¹².
Check the label on the charger and make sure the voltage and current ratings match your battery’s specifications¹².
#2. Charge your battery regularly
Don’t let your battery run completely empty or overcharge it. Both of these scenarios can reduce your battery’s life span and performance.
Ideally, you should charge your battery when it reaches around 20% of its capacity and unplug it when it reaches 100%¹². You can use a timer or a smart plug to automate this process¹².
#3. Store your battery properly
Don’t expose your battery to extreme temperatures, humidity, or direct sunlight. These factors can degrade your battery’s quality and cause it to lose its charge faster.
Store your battery in a cool and dry place, preferably between 50°F and 77°F (10°C and 25°C).
If you are not going to use your e-scooter for a long time, charge your battery to around 50% and disconnect it from the e-scooter.
This will prevent your battery from over-discharging or self-discharging.
#4. Avoid charging right after riding
Don’t charge your battery immediately after a ride, as this can cause it to overheat and damage its cells¹. Wait for at least 15 minutes before plugging in your charger, so that your battery can cool down.
#5. Rely on the charger’s light
Don’t rely on your E-scooter’s display for the charging status, as it may not be accurate or updated.
Instead, rely only on your charger’s light to indicate when the charging is complete. The light should turn from red to green when the battery is fully charged¹.
Conclusion
E-scooter not charging can be a frustrating problem, but it doesn’t have to be a permanent one.
By following the steps above, you can troubleshoot the cause of the problem and fix it yourself or with the help of a professional.
You can also prevent charging issues by taking good care of your battery and charger and following some simple tips.
With proper maintenance and care, you can enjoy riding your e-scooter for a long time without worrying about running out of power.
